agent stuck in loop repeating the same benchmark figure while tryin

Not specified by the original author.

TL;DR

Fix this in benchmark comparison agent by acting on the exact problem first: track which segment figures have already been written to the export, advance to the next segment after each confirmed write, and break the loop by refusing to write the same segment figure twice. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

agent stuck in loop repeating the same benchmark figure while trying to export the benchmark comparison error failure

Use this when

• The operation in benchmark comparison agent fails with this exact problem or symptom: agent stuck in loop repeating the same benchmark figure while trying to export the benchmark comparison error failure.
• The same failure repeats on retry with unchanged inputs.
• NPS follow-up, routing or reporting is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in benchmark comparison agent, and copy the full problem plus the response, contact or job involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: track which segment figures have already been written to the export, advance to the next segment after each confirmed write, and break the loop by refusing to write the same segment figure twice. Verify: the smallest failing scope now completes, or the named response, record or job behaves as the fix predicts.
3. Check the neighbouring responses, records or jobs that share the same config, segment or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in benchmark comparison agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result counts or status against the source in benchmark comparison agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

A figure that was written but not marked complete looked unfinished to the agent, so it regenerated and rewrote the same benchmark instead of moving to the next segment.

Variant phrasings

agent stuck in loop repeating the same benchmark figure while trying to export the benchmark comparison error failure

The verbatim form searchers paste from the console or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent stuck in loop repeating the same benchmark figure while trying to export the benchmark comparison error failure

The how-to phrasing for the same failure in benchmark comparison agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

benchmark comparison agent troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full problem first, confirm it matches the code block above, then follow the steps.

Compatibility: benchmark comparison agent at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Edge cases: if the fix works on the small scope but the full rerun still fails on a different record, treat that record as a second instance of the same class, apply the same fix per record, and keep the verified records separate from the still failing ones.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_supFi5NJmW0rSfIY0rxiMg

Resolved from the public thread: https://vectle.com/posts/pst_supFi5NJmW0rSfIY0rxiMg

Thread query: agent stuck in loop repeating the same benchmark figure while trying to export the benchmark comparison error failure

TL;DR: Fix this in benchmark comparison agent by acting on the exact problem first: track which segment figures have already been written to the export, advance to the next segment after each confirmed write, and break the loop by refusing to write the same segment figure twice. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one response, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this by acting on the exact problem first: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

Use this when

• The operation in the agent workflow fails with this exact problem: agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure.
• The same failure repeats on retry with unchanged inputs.
• A vendor risk review, questionnaire, screening or vendor record update is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a risk judgement or a tier decision. That is a risk owner decision, not this failure.

Steps

1. Reproduce the failure on one named agent run for one vendor in the agent workflow and record the full problem text plus the vendor, record or report involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Verify: the single failing agent run for one vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendor records, questionnaires or reports that share the same workflow, template or schedule, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the agent workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor supplied document, the questionnaire response or the risk record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record or review log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

The how to phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

An agent loops when its completion check never recognises the result it already produced, often because it waits on a page state or wording that does not change, so it repeats a successful step until the run is stopped.

Edge cases

• The vendor record, questionnaire version or portal page changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared workflow, template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The vendor supplied document governs what the vendor attested, the risk tool record governs the stored score or status, and the procurement record governs vendor identity and lifecycle status; record which source won and why.

Compatibility: The agent workflow at current versions, plus the vendor risk, procurement or source system the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_FWDRp3i90EaVy-Mzv5MFkg

Resolved from the public thread: https://vectle.com/posts/pst_FWDRp3i90EaVy-Mzv5MFkg

Thread query: agent stuck loop detected repeating the same step while trying to check a vendor score change after new findings error failure

TL;DR: Fix this by acting on the exact problem first: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to check a vendor score change after new findings in the vendor record, and resume from the next step instead of the repeated one. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this by acting on the exact problem first: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to map questionnaire answers to the risk framework in the vendor record, and resume from the next step instead of the repeated one. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to map questionnaire answers to the risk framework error failure

Use this when

• The operation in the agent workflow fails with this exact problem: agent stuck loop detected repeating the same step while trying to map questionnaire answers to the risk framework error failure.
• The same failure repeats on retry with unchanged inputs.
• A vendor risk review, questionnaire, screening or vendor record update is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a risk judgement or a tier decision. That is a risk owner decision, not this failure.

Steps

1. Reproduce the failure on one named agent run for one vendor in the agent workflow and record the full problem text plus the vendor, record or report involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to map questionnaire answers to the risk framework in the vendor record, and resume from the next step instead of the repeated one. Verify: the single failing agent run for one vendor now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring vendor records, questionnaires or reports that share the same workflow, template or schedule, because this class of failure rarely affects only one vendor. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in the agent workflow on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the vendor supplied document, the questionnaire response or the risk record, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the vendor record or review log so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to map questionnaire answers to the risk framework error failure

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to map questionnaire answers to the risk framework error failure

The how to phrasing for the same failure in the agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

The agent workflow troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

An agent loops when its completion check never recognises the result it already produced, often because it waits on a page state or wording that does not change, so it repeats a successful step until the run is stopped.

Edge cases

• The vendor record, questionnaire version or portal page changed after the failing run started. Refresh the current state and reapply the fix against the current values, not the values from the failed run.
• The single scope proof passes but the full rerun still fails on other vendors. Treat each remaining failure as its own scope, because a shared workflow, template or schedule can hide more than one cause.
• The source systems disagree on the correct value. The vendor supplied document governs what the vendor attested, the risk tool record governs the stored score or status, and the procurement record governs vendor identity and lifecycle status; record which source won and why.

Compatibility: The agent workflow at current versions, plus the vendor risk, procurement or source system the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_zI2YV0ULuSwc8cOkgoqTRA

Resolved from the public thread: https://vectle.com/posts/pst_zI2YV0ULuSwc8cOkgoqTRA

Thread query: agent stuck loop detected repeating the same step while trying to map questionnaire answers to the risk framework error failure

TL;DR: Fix this by acting on the exact problem first: stop the looping run, add a repeat guard that ends the step after two identical attempts with no new result, record the last successful result for the task to map questionnaire answers to the risk framework in the vendor record, and resume from the next step instead of the repeated one. Do not rerun the same operation unchanged, because the same inputs produce the same failure. Prove the fix on one agent run for one vendor first, then rerun the full scope and reconcile the results.