agent failed to complete export synthetic test data to the warehouse err

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: dry run the export with a few hundred rows first, fix schema, type and permission problems that the dry run surfaces, and only then run the full export in chunks with per chunk confirmation. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent failed to complete - export synthetic test data to the warehouse

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent failed to complete - export synthetic test data to the warehouse.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: dry run the export with a few hundred rows first, fix schema, type and permission problems that the dry run surfaces, and only then run the full export in chunks with per chunk confirmation. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Most export failures are deterministic schema or permission problems that a tiny dry run exposes in seconds but a full export discovers only after long generation and transfer.

Variant phrasings

agent failed to complete - export synthetic test data to the warehouse

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent failed to complete export synthetic test data to the warehouse error failure

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstvd6pV2hQHYoBrb_jssT1A

Resolved from the public thread: https://vectle.com/posts/pstvd6pV2hQHYoBrb_jssT1A

Thread query: agent failed to complete export synthetic test data to the warehouse error failure

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: dry run the export with a few hundred rows first, fix schema, type and permission problems that the dry run surfaces, and only then run the full export in chunks with per chunk confirmation. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: validate the schema before any fitting, list columns whose types or metadata disagree with the data, fix those first on a small sample, and only start the full fit once a sample fit completes cleanly. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent failed to complete - fit a synthesizer on production schema

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent failed to complete - fit a synthesizer on production schema.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: validate the schema before any fitting, list columns whose types or metadata disagree with the data, fix those first on a small sample, and only start the full fit once a sample fit completes cleanly. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Schema and metadata mismatches abort fits late, and an agent that skips a cheap sample fit discovers every mismatch inside the expensive full run.

Variant phrasings

agent failed to complete - fit a synthesizer on production schema

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent failed to complete fit a synthesizer on production schema error failure

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstgrA9RxPuBbQsN2tC3HIcw

Resolved from the public thread: https://vectle.com/posts/pstgrA9RxPuBbQsN2tC3HIcw

Thread query: agent failed to complete fit a synthesizer on production schema error failure

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: validate the schema before any fitting, list columns whose types or metadata disagree with the data, fix those first on a small sample, and only start the full fit once a sample fit completes cleanly. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in synthetic data agent workflow by acting on the exact message first: export in resumable chunks with one file and one load per chunk, record the last loaded chunk, and let the agent check load status per chunk instead of waiting on a single monolithic transfer. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.

agent timed out exporting synthetic test data to the warehouse

Use this when

• The operation in synthetic data agent workflow fails with this exact message or symptom: agent timed out exporting synthetic test data to the warehouse.
• The same failure repeats on retry with unchanged inputs.
• Generation, validation or export is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in synthetic data agent workflow, and copy the full message plus the table, column or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: export in resumable chunks with one file and one load per chunk, record the last loaded chunk, and let the agent check load status per chunk instead of waiting on a single monolithic transfer. Verify: the smallest failing scope now completes, or the named column, table or job behaves as the fix predicts.
3. Check the neighbouring tables, columns or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in synthetic data agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, distributions or status against the source in synthetic data agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

A single export of a large synthetic dataset exceeds step timeouts during transfer or warehouse loading, and without chunk checkpoints the transfer restarts from zero.

Variant phrasings

agent timed out exporting synthetic test data to the warehouse

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent timed out when agent tried to export synthetic test data to the warehouse error timeout failure

The how-to phrasing for the same failure in synthetic data agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

synthetic data agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: synthetic data agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_4i7iRPdPpWORGrf-eu2oKA

Resolved from the public thread: https://vectle.com/posts/pst_4i7iRPdPpWORGrf-eu2oKA

Thread query: agent timed out when agent tried to export synthetic test data to the warehouse error timeout failure

TL;DR: Fix this in synthetic data agent workflow by acting on the exact message first: export in resumable chunks with one file and one load per chunk, record the last loaded chunk, and let the agent check load status per chunk instead of waiting on a single monolithic transfer. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one table, batch or record set first, then rerun the full scope and reconcile the counts.