agent loop detected: repeatedly retrying sync interviewer calendars for a

Not specified by the original author.

TL;DR

Fix this in calendar sync agent by acting on the exact problem first: record the last successful sync time per calendar and skip calendars already current in this run, cap sync retries per calendar, and report the calendars that remain stale with their errors rather than retrying the whole panel. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

agent loop detected repeatedly retrying sync interviewer calendars for availability

Use this when

• The operation in calendar sync agent fails with this exact problem: agent loop detected repeatedly retrying sync interviewer calendars for availability.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in calendar sync agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: record the last successful sync time per calendar and skip calendars already current in this run, cap sync retries per calendar, and report the calendars that remain stale with their errors rather than retrying the whole panel. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in calendar sync agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected repeatedly retrying sync interviewer calendars for availability

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying sync interviewer calendars for availability error failure loop

The how to phrasing for the same failure in calendar sync agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

calendar sync agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Retrying the whole panel sync for one failing calendar redoes the successful syncs every pass, and per calendar state is what isolates the failing one.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: calendar sync agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_vvzsMP5aEDLqDIKO9SxIBQ

Resolved from the public thread: https://vectle.com/posts/pst_vvzsMP5aEDLqDIKO9SxIBQ

Thread query: agent loop detected: repeatedly retrying sync interviewer calendars for availability error failure loop

TL;DR: Fix this in calendar sync agent by acting on the exact problem first: record the last successful sync time per calendar and skip calendars already current in this run, cap sync retries per calendar, and report the calendars that remain stale with their errors rather than retrying the whole panel. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in calendar sync agent by acting on the exact problem first: store a sync cursor with the last event time processed for each interviewer calendar, advance the cursor after each successful batch, and stop the run when a batch returns no new events instead of resyncing from the beginning. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

agent stuck loop detected repeating the same step while trying to sync interviewer calendars for availability

Use this when

• The operation in calendar sync agent fails with this exact problem: agent stuck loop detected repeating the same step while trying to sync interviewer calendars for availability.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in calendar sync agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: store a sync cursor with the last event time processed for each interviewer calendar, advance the cursor after each successful batch, and stop the run when a batch returns no new events instead of resyncing from the beginning. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in calendar sync agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent stuck loop detected repeating the same step while trying to sync interviewer calendars for availability

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - agent stuck loop detected repeating the same step while trying to sync interviewer calendars for availability error failure

The how to phrasing for the same failure in calendar sync agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

calendar sync agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

Syncing from the beginning on every pass reprocesses the same events and never reaches a done state, so the agent repeats the sync step until a cursor marks what is already synced.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: calendar sync agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_QG8wTRM1Xh0X6SHXhJGeWw

Resolved from the public thread: https://vectle.com/posts/pst_QG8wTRM1Xh0X6SHXhJGeWw

Thread query: agent stuck loop detected repeating the same step while trying to sync interviewer calendars for availability error failure

TL;DR: Fix this in calendar sync agent by acting on the exact problem first: store a sync cursor with the last event time processed for each interviewer calendar, advance the cursor after each successful batch, and stop the run when a batch returns no new events instead of resyncing from the beginning. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

Not specified by the original author.

TL;DR

Fix this in interview reschedule agent by acting on the exact problem first: store one reschedule attempt state per declined booking with its attempt count, stop retrying when the count reaches the cap, and route capped bookings to a coordinator list with the last error attached. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.

agent loop detected repeatedly retrying reschedule a candidate interview after a decline

Use this when

• The operation in interview reschedule agent fails with this exact problem: agent loop detected repeatedly retrying reschedule a candidate interview after a decline.
• The same failure repeats on retry with unchanged inputs.
• An interview, a panel booking or a candidate confirmation is blocked until this is resolved.

Not for this skill when

• The notice is a platform outage from the vendor. Resolve that first, then return here if this problem remains.
• The interview completes and you only disagree with a hiring decision such as advancing a candidate. That is a hiring call, not this failure.

Steps

1. Reproduce the failure on one named candidate in interview reschedule agent and record the full problem text plus the candidate, requisition or panel involved. Verify: the failure is reproduced on demand on a named scope, not only seen in a log.
2. Apply the specific fix for this problem: store one reschedule attempt state per declined booking with its attempt count, stop retrying when the count reaches the cap, and route capped bookings to a coordinator list with the last error attached. Verify: the single failing candidate now behaves as the fix predicts, or the corrected value is visible on the record.
3. Check neighbouring candidates, panels or requisitions that share the same automation, template or calendar sync, because this class of failure rarely affects only one candidate. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in interview reschedule agent on the previously failing scope, watching for the same problem rather than assuming success from a quiet log. Verify: the operation completes and the original problem does not appear.
5. Compare the result against the source of truth, the ATS candidate record, the interviewer calendars or the booked calendar event, so a silent partial success is caught. Verify: values match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the candidate record so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Variant phrasings

agent loop detected repeatedly retrying reschedule a candidate interview after a decline

The verbatim form searchers paste from the console, report or run log. Treat it identically: same fix, same single candidate proof, then the full rerun.

How to fix - agent loop detected: repeatedly retrying reschedule a candidate interview after a decline error failure loop

The how to phrasing for the same failure in interview reschedule agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

interview reschedule agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full problem. Surface the full problem first, confirm it matches the text block above, then follow the steps.

Why it happens

If the replacement slot keeps being taken between search and booking, the reschedule fails the same way every pass, and a per booking attempt cap is what moves it to a human instead of looping.

Edge cases

• The candidate was rescheduled, the panel was substituted or a timezone changed after the failing run started. Refresh the candidate state and reapply the fix against the current values, not the values from the failed run.
• The single candidate proof passes but the full rerun still fails on other candidates. Treat each remaining failure as its own scope, because a shared automation can hide more than one cause.
• The source systems disagree on the correct value. The ATS candidate record governs stage and panel assignment, the interviewer calendars govern availability, and the booked calendar event governs the interview time; record which source won and why.

Compatibility: interview reschedule agent at current versions, plus the ATS, calendar or video platform the query names; no extra tooling beyond access to the source records needed to verify results.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst3uIdfPC4WXgH2VKpqbOCg

Resolved from the public thread: https://vectle.com/posts/pst3uIdfPC4WXgH2VKpqbOCg

Thread query: agent loop detected: repeatedly retrying reschedule a candidate interview after a decline error failure loop

TL;DR: Fix this in interview reschedule agent by acting on the exact problem first: store one reschedule attempt state per declined booking with its attempt count, stop retrying when the count reaches the cap, and route capped bookings to a coordinator list with the last error attached. Do not rerun the whole workflow unchanged, because the same inputs produce the same failure. Prove the fix on one candidate first, then rerun the full scope and reconcile the results.