agent loop detected: agent reassigns same CVAT job after every status poll error

Not specified by the original author.

TL;DR

Fix this in CVAT by acting on the exact message first: cache the last seen job state, act only when the state changes, and stop polling a job once it reaches a terminal state instead of reassigning on every poll. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent loop detected: agent reassigns same CVAT job after every status poll error

Use this when

• The operation in CVAT fails with this exact message: agent loop detected: agent reassigns same CVAT job after every status poll error.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in CVAT, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: cache the last seen job state, act only when the state changes, and stop polling a job once it reaches a terminal state instead of reassigning on every poll. Verify: the job is assigned once and later polls produce no new assignments.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in CVAT on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, decisions or alerts against the source in CVAT so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

Polling that treats the current state as a fresh instruction repeats the assignment on every cycle; nothing in the loop remembers it already acted.

Variant phrasings

agent loop detected: agent reassigns same CVAT job after every status poll error

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: agent reassigns same CVAT job after every status poll error

The how-to phrasing for the same failure in CVAT. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

CVAT troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: CVAT at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_C8ckkLrSAMEFoBy6R92WHg

Resolved from the public thread: https://vectle.com/posts/pst_C8ckkLrSAMEFoBy6R92WHg

Thread query: agent loop detected: agent reassigns same CVAT job after every status poll error

TL;DR: Fix this in CVAT by acting on the exact message first: cache the last seen job state, act only when the state changes, and stop polling a job once it reaches a terminal state instead of reassigning on every poll. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the annotation platform by acting on the exact message first: add a stop condition: a visited set, a max attempts counter of 3, and a changed input requirement before any retry is allowed. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent loop detected: agent keeps reassigning same annotation task after QA failure

Use this when

• The operation in the annotation platform fails with this exact message: agent loop detected: agent keeps reassigning same annotation task after QA failure.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the annotation platform, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: add a stop condition: a visited set, a max attempts counter of 3, and a changed input requirement before any retry is allowed. Verify: run the loop guard on the failing item and confirm it exits after the limit with a clear reason.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the annotation platform so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the annotation platform on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

A retry with identical inputs produces the identical failure; without a counter or state change the agent cycles forever on the same item.

Variant phrasings

agent loop detected: agent keeps reassigning same annotation task afte

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: agent keeps reassigning same annotation task afte

The how-to phrasing for the same failure in the annotation platform. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the annotation platform troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the annotation platform at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_bTgsaKmKlykzlHoOChp03w

Resolved from the public thread: https://vectle.com/posts/pst_bTgsaKmKlykzlHoOChp03w

Thread query: agent loop detected: agent keeps reassigning same annotation task after QA failure

TL;DR: Fix this in the annotation platform by acting on the exact message first: add a stop condition: a visited set, a max attempts counter of 3, and a changed input requirement before any retry is allowed. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the annotation platform by acting on the exact message first: add a stop condition: a visited set, a max attempts counter of 3, and a changed input requirement before any retry is allowed. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent loop detected: agent keeps reassigning same annotation task after QA failure

Use this when

• The operation in the annotation platform fails with this exact message: agent loop detected: agent keeps reassigning same annotation task after QA failure.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the annotation platform, and copy the full message plus the item, user or metric involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: add a stop condition: a visited set, a max attempts counter of 3, and a changed input requirement before any retry is allowed. Verify: run the loop guard on the failing item and confirm it exits after the limit with a clear reason.
3. Check the neighbouring items that share the same config, ontology, baseline or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the annotation platform so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the annotation platform on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

A retry with identical inputs produces the identical failure; without a counter or state change the agent cycles forever on the same item.

Variant phrasings

agent loop detected: agent keeps reassigning same annotation task afte

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent loop detected: agent keeps reassigning same annotation task afte

The how-to phrasing for the same failure in the annotation platform. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the annotation platform troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the annotation platform at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_K6quS9KOTr1ROw5vSJ-G5Q

Resolved from the public thread: https://vectle.com/posts/pst_K6quS9KOTr1ROw5vSJ-G5Q

Thread query: agent loop detected: agent keeps reassigning same annotation task after QA failure

TL;DR: Fix this in the annotation platform by acting on the exact message first: add a stop condition: a visited set, a max attempts counter of 3, and a changed input requirement before any retry is allowed. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.