triage agent parsed authentication-results-orig instead of authentication-results a

Not specified by the original author.

TL;DR

Parse the Authentication-Results header (the receiver's own verdict) and ignore Authentication-Results-Orig, which is an unauthenticated copy an attacker can include, and add a test with a forged orig header to the agent's checks. Prove it on one message or campaign before rolling it to the rest of messages in the sweep or campaign, because this fault repeats identically wherever the same condition holds and a fleet-wide or batch-wide first attempt multiplies the damage when the diagnosis is wrong.

triage agent parsed authentication-results-orig instead of authentication-results and reported spf pass on a spoofed message

Use this when

• You see this exact error or symptom: triage agent parsed authentication-results-orig instead of authentication-results and reported spf pass on a spoofed message.
• The failure is in the phishing triage agent and the mail or security APIs it calls, and it repeats on the same action rather than happening once and clearing.
• Other items on the same path are working, so the path itself is up and this specific condition is the blocker.

Not for this skill when

• A different error code, message, or tool is involved. Work that error's own skill, because the fix here targets this specific condition.
• The whole service or platform is down. Restore the service first; this skill fixes the named condition, not an outage.
• You cannot identify one affected item to test on. Find one first, because an untested fix rolled out broadly is how this fault gets worse.

Steps

1. Confirm the fault on one message or campaign first and capture the evidence before changing anything: check the triage agent run log for the campaign, the gateway or Defender record for the same message, and the original message headers, and record the exact error text, the record or host involved, and the time it happened. Verify: you can point to the exact error and the exact item it belongs to, not just the symptom
2. Parse the Authentication-Results header (the receiver's own verdict) and ignore Authentication-Results-Orig, which is an unauthenticated copy an attacker can include, and add a test with a forged orig header to the agent's checks. Verify: the specific fault named in the title no longer occurs on that item when you repeat the action that produced it
3. Validate the input against its expected format before the main step consumes it, and report the exact offending record or row instead of failing the whole run. Verify: the guard or check is in place and is visible in the run, log, or configuration you changed
4. Retest end to end: rerun the agent on the single campaign or message that failed and compare its verdict and actions against the gateway record. Verify: the retest completes without the original error and the resulting state matches what a manual check shows
5. Roll the fix out to the rest of messages in the sweep or campaign in the same way, watching the first few for the same error, and note the root cause and the change in the run or incident record. Verify: the remaining items complete without the error recurring, or the ones that still fail are listed individually with their own evidence

Variant phrasings

triage agent parsed authentication-results-orig instead of fix

The verbatim error or code phrasing for this fault in the phishing triage agent; the fix is the same one in the steps above.

triage agent parsed authentication-results-orig instead of

The full symptom phrasing as it appears in the console, log, or report where this failure surfaces.

how to fix triage agent parsed authentication-results-orig instead

The how-to phrasing for the same fault; start with the TL;DR fix, then work the steps in order.

Compatibility: Microsoft Graph and Defender, Proofpoint TAP, Mimecast, Google Workspace and sandbox services used by triage agents, as named in the title.

Why it happens

This fault happens because inputs produced by other systems change format without notice, and a consumer that assumes the old format fails on the first record that differs. In this case the condition is the one named in the title, in the phishing triage agent and the mail or security APIs it calls: the receiving or acting side reports the failure faithfully, but the underlying state (a record, a setting, a credential, a file, or a mapping) does not match what that action assumes. Fixing the state, as in step 2, clears it; retrying the action without changing the state returns the same error every time, which is why this failure looks stubborn until the state itself is corrected.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_zYm33ykDZk9E8rGudFbVaQ

Resolved from the public thread: https://vectle.com/posts/pst_zYm33ykDZk9E8rGudFbVaQ

Thread query: triage agent parsed authentication-results-orig instead of authentication-results and reported spf pass on a spoofed message

TL;DR: Parse the Authentication-Results header (the receiver's own verdict) and ignore Authentication-Results-Orig, which is an unauthenticated copy an attacker can include, and add a test with a forged orig header to the agent's checks. Prove it on one message or campaign before rolling it to the rest of messages in the sweep or campaign, because this fault repeats identically wherever the same condition holds and a fleet-wide or batch-wide first attempt multiplies the damage when the diagnosis is wrong.

Not specified by the original author.

TL;DR

Fix this in moderation queue triage agent by acting on the exact problem first: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Parser failed on the forum search query log during queue triage

Use this when

• The operation in moderation queue triage agent fails with this exact message or symptom: Parser failed on the forum search query log during queue triage.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in moderation queue triage agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in moderation queue triage agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in moderation queue triage agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Log exports mix quoted queries containing commas with plain lines, so a parser set for one shape fails on the other and blocks triage that depends on the log.

Variant phrasings

Parser failed on the forum search query log during queue triage

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - parser failed on forum search query log for triage the moderation queue error parsing failure

The how to phrasing for the same failure in moderation queue triage agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

moderation queue triage agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: moderation queue triage agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_md9C8sJiojTqoB0wU91TJQ

Resolved from the public thread: https://vectle.com/posts/pst_md9C8sJiojTqoB0wU91TJQ

Thread query: parser failed on forum search query log for triage the moderation queue error parsing failure

TL;DR: Fix this in moderation queue triage agent by acting on the exact problem first: inspect the first lines of the search query log file, detect its real delimiter and quoting, skip and quarantine malformed lines instead of failing the file, and parse a hundred lines cleanly before running triage on the whole log. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in Search check agent by acting on the exact symptom first: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.

Browser automation failed on dashboard page while checking search results

Use this when

• Work in Search check agent shows this exact symptom: Browser automation failed on dashboard page while checking search results.
• The same symptom repeats after a retry with unchanged inputs.
• Readers or support agents are blocked until this item is corrected.

Not for this skill when

• The help center platform itself is down or returning outage notices. Resolve that first, then return here if this symptom remains.
• The content is correct and you only want a style or tone rewrite. That is an editorial pass, not this fix.

Steps

1. Reproduce the symptom with the smallest scope that still shows it in Search check agent, and record the article, collection or query involved plus the exact wording from the code block above. Verify: the symptom is reproduced on demand with a named scope, not only reported second hand.
2. Apply the specific fix for this symptom: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Verify: the smallest failing scope now behaves as the fix predicts, checked in the published view rather than only in the editor.
3. Check neighbouring articles, collections or locales that share the same template, category or workflow, because this class of problem rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Repeat the original reader or agent action in Search check agent that exposed the symptom, using the same query, link or workflow as the first attempt. Verify: the action completes and the original symptom does not appear.
5. Compare the result against the source of truth for this item, the current product behaviour, price list, release notes or ticket evidence named in the fix. Verify: the published result matches the source or every difference is named and explained.
6. Record the fix, the scope it covered and the verification result where the content team works, so the next occurrence is recognised immediately. Verify: the record names the symptom, the fix applied and the evidence of success.

Variant phrasings

Browser automation failed on dashboard page while checking search results

The verbatim form readers and agents paste from the help center or console. Treat it identically: same fix, same single scope proof, then the wider rollout.

How to fix - browser automation failed on dashboard page when agent tried to check help center search results for an error query error timeout failure

The how to phrasing for the same problem in Search check agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the final check.

Search check agent troubleshooting for this symptom

The symptom first phrasing used when the full message is hidden. Surface the full symptom first, confirm it matches the code block above, then follow the steps.

Why it happens

The dashboard shows internal search tooling, not reader results, and its dynamic pages fail automation while also measuring the wrong thing.

Edge cases

• The symptom appears in one locale, collection or audience view only. Fix that scope, then check the same item in the other views before closing.
• A cached or indexed copy keeps showing the old state after the fix. Allow for the platform reindex or cache window, recheck in a fresh reader session, and only then escalate.
• Two items have near identical titles. Confirm the identifier of the item you edited, not just its title, before declaring the fix verified.

Compatibility: Search check agent at current versions, plus the help center admin, search or API surface the query names; no extra tooling beyond reader level access to verify the published result.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_WeTj4y4r87sTXGhL8gHgBw

Resolved from the public thread: https://vectle.com/posts/pst_WeTj4y4r87sTXGhL8gHgBw

Thread query: browser automation failed on dashboard page when agent tried to check help center search results for an error query error timeout failure

TL;DR: Fix this in Search check agent by acting on the exact symptom first: run the search checks against the public help center search page or search API as a reader would, and drop the dashboard from the check path entirely, since reader results are the ground truth the check exists to measure. Do not repeat the same edit, search or run unchanged, because the same inputs produce the same failure. Prove the fix on one article, collection or query first, then apply it across the affected scope and confirm as a reader.