parser failed on spam account signup list for merge duplicate community

Not specified by the original author.

TL;DR

Fix this in duplicate thread merge agent by acting on the exact problem first: validate the signup list file before parsing, locate the line the parser names, fix quoting or delimiter problems in that export, and continue merging with the readable portion while the bad lines are quarantined and reported by line number. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Parser failed on the spam account signup list during duplicate merging

Use this when

• The operation in duplicate thread merge agent fails with this exact message or symptom: Parser failed on the spam account signup list during duplicate merging.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in duplicate thread merge agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: validate the signup list file before parsing, locate the line the parser names, fix quoting or delimiter problems in that export, and continue merging with the readable portion while the bad lines are quarantined and reported by line number. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in duplicate thread merge agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in duplicate thread merge agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Signup exports contain free text fields with commas and line breaks that break a plain parser, and one bad line should never block merges that depend on the rest of the list.

Variant phrasings

Parser failed on the spam account signup list during duplicate merging

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - parser failed on spam account signup list for merge duplicate community threads error parsing failure

The how to phrasing for the same failure in duplicate thread merge agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

duplicate thread merge agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: duplicate thread merge agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_aXrtNRKax-SMPt-BE1Mgtw

Resolved from the public thread: https://vectle.com/posts/pst_aXrtNRKax-SMPt-BE1Mgtw

Thread query: parser failed on spam account signup list for merge duplicate community threads error parsing failure

TL;DR: Fix this in duplicate thread merge agent by acting on the exact problem first: validate the signup list file before parsing, locate the line the parser names, fix quoting or delimiter problems in that export, and continue merging with the readable portion while the bad lines are quarantined and reported by line number. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in duplicate thread merge agent by acting on the exact problem first: verify the search log export contains rows for the period, check the scraper is reading the rendered results or the raw export rather than a sign in page, and update its field selectors against the current log format before concluding there are no duplicates to merge. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Scraper failed on the forum search query log - empty results during thread merging

Use this when

• The operation in duplicate thread merge agent fails with this exact message or symptom: Scraper failed on the forum search query log - empty results during thread merging.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in duplicate thread merge agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: verify the search log export contains rows for the period, check the scraper is reading the rendered results or the raw export rather than a sign in page, and update its field selectors against the current log format before concluding there are no duplicates to merge. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in duplicate thread merge agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in duplicate thread merge agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

Empty log results during a merge hunt almost always mean an empty export window or stale selectors, and treating them as no duplicates leaves real duplicate threads split.

Variant phrasings

Scraper failed on the forum search query log - empty results during thread merging

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed on forum search query log returning empty results for merge duplicate community threads error scraping failure

The how to phrasing for the same failure in duplicate thread merge agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

duplicate thread merge agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: duplicate thread merge agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstUctweKG05oBGRyXyjNKkA

Resolved from the public thread: https://vectle.com/posts/pstUctweKG05oBGRyXyjNKkA

Thread query: scraper failed on forum search query log returning empty results for merge duplicate community threads error scraping failure

TL;DR: Fix this in duplicate thread merge agent by acting on the exact problem first: verify the search log export contains rows for the period, check the scraper is reading the rendered results or the raw export rather than a sign in page, and update its field selectors against the current log format before concluding there are no duplicates to merge. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in escalated post routing agent by acting on the exact problem first: confirm the signup list export is current and non empty by opening it directly, repair the scraper field mapping if author ids parse as blank, and route the escalation from the post record itself while the list is fixed, since routing must not wait on an enrichment file. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.

Scraper failed on the spam account signup list - empty results during escalation routing

Use this when

• The operation in escalated post routing agent fails with this exact message or symptom: Scraper failed on the spam account signup list - empty results during escalation routing.
• The same failure repeats on retry with unchanged inputs.
• Moderation, routing, auditing or a member facing community task is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this problem remains.
• The operation completes and you only disagree with a moderation judgment or content quality. That is a policy review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in escalated post routing agent, and copy the full message plus the post, thread, report or member involved into the run notes. Verify: the problem is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this problem: confirm the signup list export is current and non empty by opening it directly, repair the scraper field mapping if author ids parse as blank, and route the escalation from the post record itself while the list is fixed, since routing must not wait on an enrichment file. Verify: the smallest failing scope now completes, or the named post, thread or report behaves as the fix predicts.
3. Check the neighbouring posts, threads, reports or members that share the same setting, rule or workflow, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in escalated post routing agent on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts or status against the source in escalated post routing agent so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the problem, the fix applied and the evidence of success.

Why it happens

The signup list only enriches routing with account age, so an empty scrape should degrade the context, not block assigning a moderator to an escalated post.

Variant phrasings

Scraper failed on the spam account signup list - empty results during escalation routing

The verbatim form searchers paste from the console, queue or report. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - scraper failed on spam account signup list returning empty results for route an escalated post to a moderator error scraping failure

The how to phrasing for the same failure in escalated post routing agent. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

escalated post routing agent troubleshooting for this failure

The symptom first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the small scope but the full rerun still fails on a different item, treat that item as a new instance, record its scope separately, and apply the same steps rather than widening the first fix blindly.
• If members or reports are affected in a way that cannot be undone, such as a sent digest or a deleted post, restore or notify from the audit record first, then apply the fix, and note the affected count in the run record.
• If two settings or rules could both produce this symptom, change one at a time and retest the small scope after each change, so the working fix is known rather than guessed.

Compatibility: escalated post routing agent at current versions, plus the admin console, moderation queue or API the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pstSflogt2LgUlWEYX6-cUvQ

Resolved from the public thread: https://vectle.com/posts/pstSflogt2LgUlWEYX6-cUvQ

Thread query: scraper failed on spam account signup list returning empty results for route an escalated post to a moderator error scraping failure

TL;DR: Fix this in escalated post routing agent by acting on the exact problem first: confirm the signup list export is current and non empty by opening it directly, repair the scraper field mapping if author ids parse as blank, and route the escalation from the post record itself while the list is fixed, since routing must not wait on an enrichment file. Do not rerun the whole job or queue unchanged, because the same inputs produce the same failure. Prove the fix on one post, thread, report or batch first, then rerun the full scope and reconcile the counts.