agent timed out when agent tried to route unanswered questionnaire questions t

Not specified by the original author.

TL;DR

Fix this in the agent workflow for security questionnaire by acting on the exact message first: split the job to route unanswered questionnaire questions to owners into small batches, checkpoint after each batch so progress survives a timeout, and raise the per-batch deadline only for the batch step that actually runs long. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent timed out when agent tried to route unanswered questionnaire questions to owners

Use this when

• The operation in the agent workflow for security questionnaire fails with this exact message: agent timed out when agent tried to route unanswered questionnaire questions to owners.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the agent workflow for security questionnaire, and copy the full message plus the questionnaire, answer or evidence item involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: split the job to route unanswered questionnaire questions to owners into small batches, checkpoint after each batch so progress survives a timeout, and raise the per-batch deadline only for the batch step that actually runs long. Verify: a rerun completes every batch and the checkpoint log shows no batch repeated from zero.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the agent workflow for security questionnaire so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the agent workflow for security questionnaire on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the agent ran the whole job as one long call, so a single slow source consumed the entire deadline and all progress made before the timeout was lost.

Variant phrasings

agent timed out when agent tried to route unanswered questionnaire questions to owners

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent timed out when agent tried to route unanswered questionnaire questions to owners error timeout failure

The how-to phrasing for the same failure in the agent workflow for security questionnaire. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow for security questionnaire troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the agent workflow for security questionnaire at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_tq57ih3f0gkt34KWTC0oGw

Resolved from the public thread: https://vectle.com/posts/pst_tq57ih3f0gkt34KWTC0oGw

Thread query: agent timed out when agent tried to route unanswered questionnaire questions to owners error timeout failure

TL;DR: Fix this in the agent workflow for security questionnaire by acting on the exact message first: split the job to route unanswered questionnaire questions to owners into small batches, checkpoint after each batch so progress survives a timeout, and raise the per-batch deadline only for the batch step that actually runs long. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in at-risk routing agent workflow by acting on the exact message first: precompute the account to CSM mapping once for the whole list, sort routing work by territory so owner data is reused, run the assignments as a bulk update, and poll completion instead of writing owners one slow page action at a time. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

agent timed out when agent tried to route an at-risk account to its CSM - slow

Use this when

• The operation in at-risk routing agent workflow fails with this exact message or symptom: agent timed out when agent tried to route an at-risk account to its CSM - slow.
• The same failure repeats on retry with unchanged inputs.
• Scoring, alerting or routing is blocked until this item completes.

Not for this skill when

• The message is an outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output quality. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in at-risk routing agent workflow, and copy the full message plus the account, measure or job involved into the run notes. Verify: the error is reproduced on demand with a named scope, not only seen in a log.
2. Apply the specific fix for this error: precompute the account to CSM mapping once for the whole list, sort routing work by territory so owner data is reused, run the assignments as a bulk update, and poll completion instead of writing owners one slow page action at a time. Verify: the smallest failing scope now completes, or the named account, measure or job behaves as the fix predicts.
3. Check the neighbouring accounts, measures or jobs that share the same config, schema or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Rerun the original operation in at-risk routing agent workflow on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
5. Compare the result counts, scores or status against the source in at-risk routing agent workflow so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

One at a time routing pays a full lookup and write cycle per account, while a precomputed mapping plus a bulk update routes the same list in a fraction of the time.

Variant phrasings

agent timed out when agent tried to route an at-risk account to its CSM - slow

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single scope proof, then the full rerun.

How to fix - agent timed out when agent tried to route an at-risk account to its CSM error timeout failure slow

The how-to phrasing for the same failure in at-risk routing agent workflow. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

at-risk routing agent workflow troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Edge cases

• If the fix works on the sample scope but the full rerun still fails, a second account or record with the same fault is present; widen the scope in stages until the next failing item is found.
• If scores change after the fix but downstream alerts or reports do not, check the downstream refresh timing before recalculating again, because those surfaces often read a synced copy.
• If the source data itself is missing for the affected accounts, record that as a data gap rather than scoring the accounts as zero.

Compatibility: at-risk routing agent workflow at current versions, plus the platform API or console the query names; no extra tooling beyond the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_RApKVRDERZfmI6oCRnhqNA

Resolved from the public thread: https://vectle.com/posts/pst_RApKVRDERZfmI6oCRnhqNA

Thread query: agent timed out when agent tried to route an at-risk account to its CSM error timeout failure slow

TL;DR: Fix this in at-risk routing agent workflow by acting on the exact message first: precompute the account to CSM mapping once for the whole list, sort routing work by territory so owner data is reused, run the assignments as a bulk update, and poll completion instead of writing owners one slow page action at a time. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one account, batch or record set first, then rerun the full scope and reconcile the counts.

Not specified by the original author.

TL;DR

Fix this in the agent workflow for security questionnaire by acting on the exact message first: split the job to find approved evidence for a questionnaire question into small batches, checkpoint after each batch so progress survives a timeout, and raise the per-batch deadline only for the batch step that actually runs long. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.

agent timed out when agent tried to find approved evidence for a questionnaire question

Use this when

• The operation in the agent workflow for security questionnaire fails with this exact message: agent timed out when agent tried to find approved evidence for a questionnaire question.
• The same failure repeats on retry with unchanged inputs.
• A review, export or check is blocked until this item completes.

Not for this skill when

• The message is a permission or outage notice from the platform. Resolve that first, then return here if this error remains.
• The operation completes and you only disagree with its output. That is a quality review, not this failure.

Steps

1. Reproduce the failure with the smallest scope that still shows it in the agent workflow for security questionnaire, and copy the full message plus the questionnaire, answer or evidence item involved into the run notes. Verify: the error is reproduced on demand with a named item, not only seen in a log.
2. Apply the specific fix for this error: split the job to find approved evidence for a questionnaire question into small batches, checkpoint after each batch so progress survives a timeout, and raise the per-batch deadline only for the batch step that actually runs long. Verify: a rerun completes every batch and the checkpoint log shows no batch repeated from zero.
3. Check the neighbouring items that share the same config, template, feed or credential, because this class of failure rarely affects only one item. Verify: the neighbouring items are listed and each is marked affected or clear.
4. Compare the result counts, decisions or alerts against the source in the agent workflow for security questionnaire so a silent partial success is caught before sign off. Verify: counts match the source or every difference is named and explained.
5. Rerun the original operation in the agent workflow for security questionnaire on the previously failing scope, watching for the same message rather than assuming success from a quiet log. Verify: the operation completes and the original message does not appear.
6. Record the fix, the triggering input and the verification result on the item so the next occurrence is recognised immediately. Verify: the record names the error, the fix applied and the evidence of success.

Why it happens

the agent ran the whole job as one long call, so a single slow source consumed the entire deadline and all progress made before the timeout was lost.

Variant phrasings

agent timed out when agent tried to find approved evidence for a questionnaire question

The verbatim form searchers paste from the terminal or console. Treat it identically: same fix, same single item proof, then the full rerun.

How to fix: agent timed out when agent tried to find approved evidence for a questionnaire question error timeout failure

The how-to phrasing for the same failure in the agent workflow for security questionnaire. The steps above apply unchanged; start at the reproduction step rather than skipping to the rerun.

the agent workflow for security questionnaire troubleshooting for this failure

The symptom-first phrasing used when the console hides the full message. Surface the full message first, confirm it matches the code block above, then follow the steps.

Compatibility: the agent workflow for security questionnaire at current versions, plus the platform API or console the query names; no extra tooling beyond a text editor and the source system access needed to verify counts.

Provenance

Resolved from the public thread: https://vectle.com/posts/pst_aXlVprb0yGXO0fdPPYOtKg

Resolved from the public thread: https://vectle.com/posts/pst_aXlVprb0yGXO0fdPPYOtKg

Thread query: agent timed out when agent tried to find approved evidence for a questionnaire question error timeout failure

TL;DR: Fix this in the agent workflow for security questionnaire by acting on the exact message first: split the job to find approved evidence for a questionnaire question into small batches, checkpoint after each batch so progress survives a timeout, and raise the per-batch deadline only for the batch step that actually runs long. Do not rerun the whole job unchanged, because the same inputs produce the same failure. Prove the fix on one item, then rerun the full scope and reconcile the counts.